EV charging pile
Brand: Lersion
Product origin: China
Delivery time: 2-15 days
Supply capacity: 5000
IGBT module
High end products
Electronic Vehicle Charger & EV charge station
Input 3 phase 380V or single phase 220V, output 30-100,100-750V DC, electric car charging, electric vehicle charger
| Parameter | EV Charging Station Power Module | |||||||
| TH400Q15NZ-220AC | TH350Q30NZ | TH450Q14NZ-A | TH750Q20NZ | TH90Q130NZ | TH92Q50NZ | TH80Q40NZ-S | ||
| Input | Input voltage | 220V AC±15% | 380V AC±15%, 3 phase | 380V AC±15%, 3 phase | 220V AC±15% | |||
| AC input frequency | 45Hz ~ 65Hz | 45Hz ~ 65Hz | ||||||
| Efficiency | ≥90% | ≥92% | ≥93% | ≥92% | ≥92% | |||
| Power factor | ≥0.99 (APFC), or ≥0.93 (PPFC) | ≥0.99 (APFC), or ≥0.93 (PPFC) | ||||||
| Output | Output voltage | 50-500V | 150-350V | 300-450V | 40-90V | 60-96V | 30-80V | |
| Output current | 5A | 30A | 14A | 20A | 130A | 50A | 40A | |
| power | 2.5KW | 10KW | 6KW | 15KW | 12KW | 12KW | 3.2KW | |
| Start delay | 3 ~ 8s | 3 ~ 8s | ||||||
| Total harmonic current | ≤ 5% (APFC), or ≤ 30% (PPFC) | ≤ 5% (APFC), or ≤ 30% (PPFC) | ||||||
| Current stabalization | ≤ ± 1% | ≤ ± 1% | ||||||
| Voltage stabalization | ≤ ± 0.5% | ≤ ± 0.5% | ||||||
| Inter-rectifier Current sharing imbalance | ≤ ± 3% | ≤ ± 5% | ≤ ± 3% | ≤ ± 5% | ≤ ± 3% | |||
| Cooling method | Forced cooling with fan | Forced cooling with fan | ||||||
| Protocal | RS485 and RS232, CAN | RS485 and RS232, CAN | ||||||
| Protection | Multi-protection | Multi-protection including input over or under-voltage, output over or under-voltage, over-temperature, reverse connection, phase failure, and short circuit protection. The rectifier will shut down without output, and will return to normal operating after fault is cleared. | ||||||
| Automatic current limiting | The output current will keep fixed without increase after it exceed the set point. | |||||||
| Environment | Operation ambient temperature | -20°C ~ 50°C | ||||||
| Storage temperature | -40°C~ 60°C | |||||||
| Relative humidity | ≤ 90% | |||||||
| Air pressure | 70 ~ 106kPa | |||||||
| Safety | Insulation resistance | I/O to chassis and input to output >10MΩ (Test voltage: 500Vdc) | ||||||
| Dielectric strength | Impose 2000Vdc between I/O and the chassis aftering shorting the input and output for one minutes. No breakdown or flashover | |||||||
| Mechanical | Size (H × W × D) mm | 150×88 ×400 | 482×88 ×500 | 450×85 ×260 | 680×13 ×600 | 482×88 ×450 | 360×260 ×360 | 88×230 ×400 |
| Weight | 8kg | 20kg | 10kg | 46kg | 20kg | 10kg | 5kg | |
